How do I turn my Cats2/Dogs2 Weenect tracker on and off?

Turning On the Tracker

To activate your Weenect Cats² or Dogs² tracker, start by placing it outside in an open area. Then, follow these simple steps:

  1. Press the ON/OFF Button: Locate the ON/OFF button on your tracker. Hold it down for three seconds.
  2. Vibration and Sound: When the tracker vibrates and emits a sound, you can release the button. Your tracker is now turned on.
  3. Observing the LEDs: Keep the tracker outside until the yellow LED starts flashing rapidly. This indicates that the tracker is trying to obtain its first GPS position.

mceclip0.png

Illustration of the on/off button

First GPS Location: When the yellow LED flashes twice and the blue LED flashes once, it means that your tracker has successfully obtained a first GPS position.

 

Turning Off the Tracker

To turn off your Weenect Cats² or Dogs² tracker, follow this simple procedure:

  1. Triple Press on ON/OFF: Quickly press the ON/OFF button three times in a row.
  2. Confirmation by Vibration: As soon as the tracker vibrates, it means it is completely turned off.

 

Conclusion

These instructions will help you to easily turn on and off your Weenect Cats² and Dogs² trackers. Keep in mind that the process of obtaining the first GPS position may vary depending on the environment and weather conditions.

 

💡 Did You Know?

To optimize battery life and GPS accuracy, it is recommended to place the tracker in a location with good visibility of the sky. Obstacles such as buildings or dense trees can affect GPS performance.

For a better understanding of your tracker, here is an explanatory video that will allow you to know the status of your tracker through the diodes.

Was this article helpful?
182 out of 359 found this helpful